Air Bottle, Pump, Hand Pump ???????????

Pavle

Pavle

Member
How where and what are people using to refill their air tanks ?
I see more and more air tanks on Pcp, s that are between 250 and 300 bar or even more so the question is as the title suggests how and where do you fill them.
 
Strong advice: forget a hand pump right away unless you want to get biceps like Popeye and ruin your hand pump.
Today there are air rifles that can be loaded up to 300bar, but as far as I know, most manufacturers advise not to load them above 250bar.
In any case, the higher the pressure, the smaller the number of useful fills. One way is so-called tethering, when you shoot with a bottle directly attached to the air rifle. Or to buy as big bottle as possible.
PS. Some specialized high-pressure cylinders may be rated for higher pressures, up to 450 bar or even more, but you have to sell your car first to buy one.
 
I get
Joca said:
Strong advice: forget a hand pump right away unless you want to get biceps like Popeye and ruin your hand pump.
Today there are air rifles that can be loaded up to 300bar, but as far as I know, most manufacturers advise not to load them above 250bar.
In any case, the higher the pressure, the smaller the number of useful fills. One way is so-called tethering, when you shoot with a bottle directly attached to the air rifle. Or to buy as big bottle as possible.
PS. Some specialized high-pressure cylinders may be rated for higher pressures, up to 450 bar or even more, but you have to sell your car first to buy one.
Click to expand...
I get it tnx Joca but where and how do you fill them ????
dive shops
 
Last edited:
Great
Joca said:
For filling cylinder up to 300bar, just contact @wooyadeen and everything will be settled up fast and easy.
Click to expand...
panimshop.com

Set ventila za punjenje PCP vazdušnog oružja - Panim Shop

Feel station – set ventila za punjenje U kompletu dolazi sa crevom i manometrom
panimshop.com

panimshop.com

Sefic karbonska boca 6.8 L - Panim Shop

Karbonske boce pogodne za PCP vazdušno oružje Materijal: Karbon Test pritisak: 450. Bara Kapacitet: 6.8 L Životni vek boce je do 11/2034 Pritisak: 300. Bara Težina prazne boce: […]
panimshop.com

Am i going in the right direction with these and is this all i will need to connect the cylinder to the air tank or do i need more or would you recommend something else.
sorry for so many questions
 
Well, I have the same cylinder for three years now and haven't had any problems until now. However, some say that carbon cylinders are more sensitive to damage and less safe than steel ones. Feel free to ask wooyadeen about the details, and other members can also write their thoughts here.
We've written a lot on this Forum about carbon and steel cylinders, but I know it's a bit more complicated for you to search the Forum, so I ask everyone who wants to write their opinion here. I personally do not see any problem with using carbon cylinders that are on legal sale.
 
Joca said:
Well, I have the same bottle for three years now and haven't had any problems until now. However, some say that carbon cylinders are more sensitive to damage and less safe than steel ones. Feel free to ask wooyadeen about the details, and other members can also write their thoughts here.
We've written a lot on this Forum about carbon and steel cylinders, but I know it's a bit more complicated for you to search the Forum, so I ask everyone who wants to write their opinion here. I personally do not see any problem with using carbon cylinders that are on legal sale.
Click to expand...
Im thinking it will be great solution i have no fear of carbon personally and it probably has a steel liner, and is that the correct connector directly to pcp nozzle ?
 
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top